DiTEC Teak Magic Part 2, Cleaner & Brightener, 32oz – MARPOL Compliant

Restore the natural beauty of your teak surfaces with DiTEC Teak Magic Part 2, an essential component of the highly effective two-part system. This 32oz cleaner and brightener is engineered to safely bring teak and other wood surfaces back to their original color and brightness without the need for harsh sanding. As a non-hazardous, organic, and eco-friendly alternative to corrosive cleaners, it protects your vessel and the environment. DiTEC Teak Magic is MARPOL Annex III and V compliant, readily biodegradable, and safe to rinse into waterways. Enhance your marine wood care routine today for a pristine finish.

• Two-Part System: Works synergistically with DiTEC Teak Magic Part 1 to effectively clean and brighten teak, providing a freshly sanded look without abrasive methods.
• Non-Destructive Formula: Safely cleans without damaging teak, clothing, or skin, ensuring a gentle yet powerful restoration.
• Environmentally Responsible: MARPOL Annex III and V compliant, phosphate-free, bleach-free, and non-corrosive, making it safe for rinsing into waterways and sensitive marine environments.
• Highly Concentrated: A 1:4 dilution ratio for deep cleaning provides extensive coverage, with one mixed quart covering approximately 200-250 sq. ft., maximizing efficiency and value. For lighter cleaning, a 1:6 to 1:8 ratio can cover up to 350 sq. ft.
• Gel Consistency: Ensures controlled application, minimizing waste and preventing runoff on vertical or sloped surfaces.
• Residue-Free Results: Leaves no dirty residue on gelcoat or moldings after rinsing, ensuring a clean and polished surrounding area.
• Metal-Safe Application: Formulated to be safe on most finished metals, including stainless steel. (Note: Avoid contact with soft metals like aluminum and brass; rinse immediately if contact occurs).

• This product is designed for wood surfaces that have NOT had paint, varnish, or lacquer applied.
• If your teak has polyurethane or a factory-applied protective coating, it must be sanded off first before applying this product for optimal results.